D69-2 OAWWOOLEA UEWA OEMM. Description of the UMMO spacecraft (2)

IDUUWII AYII (PROPULSION)

 

Just as, with regard to the Technique we use for the inversion of all the atomic subparticles included in the geometric enclosure of the UEWA, we reserve the right to omit any information that could be immediately applied by your Earth Physicists and Engineers, I must also censor the transmission of documentation, even if merely indicative, concerning the scientific bases of the propulsion system of our SHIPS and their application to it.

 

In this case, then, I can offer you only a purely topographical description of the location of the corresponding equipment.

 

The IDUUWII AYII (PROPULSION) Equipment is distributed inside a toroid of revolution assembled (embedded) within the DUII (Fin or crown (IMAGE 1 (6) ) that surrounds the ship in its central plane. Its energy source is located in the ENNOI (TURRET OR DOME).

 

IMAGE 1

 

This energy generator also has a toroidal morphology; its most characteristic element is a mesh of strongly ionized gas whose lattice is controlled by a complex very-high-frequency Magnetic Field (I use the word “mesh” here as a synonym of spatial Network or Graph). The temperature of the ionized gas, when it is in resonance with the frequency of the magnetic environment, reaches 0,7 · 10⁶ degrees Kelvin (I use Earth physical units, of course).

 

Propulsion control is very complex, and since the direction, cruising speed and automatic control of accelerations at each given instant depend on the XAANMOO AYUU (CENTRAL NETWORK OF COMPUTERS), the kinematic function is very complicated; its multiple correcting parameters depend, for example, on: what we call USAGIISOO (“ISODYNAMIC” STATES of COSMIC SPACE); the presence of intense Gravitational Fields; the threat of “COSMOLITHS” (forgive us for using this Neologism of ours, which we consider more felicitous than the words “meteorite” or “aerolite”); possible attacks by alien Spaceships; spatial Zones of ionic, electromagnetic or gravitational Radiation that are dangerous or disturbing for our on-board systems, etc.

 

IBOZOOAIDAA (PARTICLE INVERTER)

 

The location of this equipment must be indicated throughout the whole solid mass of the structure, although the control Core is fixed, in all our models of UEWA (SHIPS), in the ENNOI (a kind of cylindroid dome crowning our Spaceships (IMAGE 2 (1) )

 

 

It is perhaps, if we except the IDUWII AYII Equipment, the vital factor of our OAWOOLEA UEWA OEMM. (Whose phonetic roots are: OAWOO = DIMENSION: OOLEEA = To penetrate; To drill (1)

 

(1): The phoneme OOLEA has a different meaning depending on the verbal context in which it is framed. The most correct sense when applied to the Technical Field is: TO CHANGE, TO PASS from one PHYSICAL MEDIUM to ANOTHER, and in Mathematical language it means TO INCREASE OR DECREASE the VALUE of an ANGLE by another INFINITESIMAL ANGLE. In the case we are studying, this would be the most faithful version of the phonetic root.

 

UEWA = VEHICLE; SHIP OEMM = BETWEEN STARS; SIDEREAL; FROM SPHERICAL MASS TO SPHERICAL MASS)

 

The whole superstructure of the Spaceship, as we will explain further on, is protected by a finely perforated ceramic substance that covers its outer armour.

 

A spatial safety crust has been delimited, whose thickness reaches a value of ΔU=0,0176 ENMOO (1 ENMOO is equivalent to about 1,873 metres), surrounding the whole UEWA. We call IITOA the ideal threshold surface that separates the enclosure, whose morphology is similar to that of the SHIP (IMAGE 7), from the rest of Space.

 

IMAGE 7

 

Any subatomic particle, or energy “quantum” (IBOZOO UU), situated inside this enclosure can be inverted into another three-dimensional system.

 

For example (IMAGE 6): a neutron A corresponding to any mass inside

IMAGE 6

 

the SHIP, including of course the masses of the crew, gases, ionic radiations, etc., as well as, for example, another proton B corresponding to the hull or armour, and all the atomic and energy subparticles C of any molecule of gas or particle of cosmic dust contained in the narrow cortical surroundings of thickness ΔU bounded by IITOA, will appear to “vanish” in the sight of an imaginary observer provided with exceptional observation equipment and situated outside the enclosure bounded by ITOOA.

 

This instantaneous transformation, which we call OAWOOLEAIDAA, is brought about by the IBOZOO AIDAA equipment itself (8), which simultaneously inverts the oriented “axes” of all the IBOZOO UU, including those of its own structure.

 

I cannot even suggest to you the technical basis of this system, the mere mention of which must no doubt seem today, to Earth engineers, a fantasy belonging to Science Fiction.

 

But I can offer you some complementary data: the input of Energy needed for this physical transformation is very great, and for our UEWA it is shown in the graphic representation of the function

 

P = φ (t)

(IMAGE 8).

 

(U-C Note: To the right of the original image 8 we have placed the one that appears in Dr. Juan Aguirre's compilation. Note, in Dr. Aguirre's image, the “E” written like a capital EPSILON in the word OAWOLЄAIDA. It can be compared with very similar handwriting in IMAGE A of NOTE 3, “FILAMЄNTO”. Where did Dr. Aguirre get this image 8 from?)

 

 

The ENERGY brought into play up to the instant t₀ (OAWOOLEAIDAA) (THE INSTANT AT WHICH ALL THE SUBPARTICLES UNDERGO THEIR INVERSION) is restored in full without losses, so that ΔW₁ = Δ W₂, both represented by hatched areas of the graph, being retransformed in the new three-dimensional framework into MASS (ΔW₂ represents this energy equivalent of the Mass generated). You will understand its Physical meaning better if I tell you that immediately after t₀, and therefore in the new three-dimensional framework, the UEWA moves at a higher speed without the abrupt change of speed (infinite ACCELERATION at the instant t₀) having been felt by the Ship and its Crew.

 

P₀ represents the threshold Power level needed to transform the whole mass m₀ of the UEWA (m₀ represents not the mass at absolute rest but the real Mass with respect to a reference system at the instant t₀. The limiting power P₀ = φ (m₀) (m₀ includes not only the mass of the Uewa but also that of the particles contained in the enclosure of the ITOOA (IMAGE 7) (Read also NOTE 10 of the APPENDIX).

 

 

 

 

AYIYAA OAYUU (ENCLOSURE FOR THE CREW).

 

The crew of one of our Spaceships is not, as we have indicated, in the ENNAOEI (2) itself; on the contrary, this hollow structure carries inside it a second, “floating” structure in the shape of a hollow ring, called by us AYIYAA OYUU, IN WHICH ARE LOCATED NOT only the travellers but the whole range of auxiliary equipment transported and a series of devices for control and direct detection. IMAGE 9

 

 

The situation of this FLOATING CABIN, provided with exits or hatches called by us IMMAA (IMAGE 1 (15) ), inside the YAAXAIUU cavity may present two PHASES.

 

OEE “PHASE”

Imagine a first phase of “Flight” or displacement of the UEWA in which it is not moving at a moderately constant cruising speed or with bearable acceleration peaks. That is, an interval in which the SHIP, because it needs to reach high levels of speed, is obliged to undergo steep slopes of the function of t: velocity. )) /

 

The interior of the AYIYAA UU is first filled with a viscous mass in the state that Earth Physical Chemists call “GEL”. It is a compound with a low gelling point in hydrosol suspension, initially contained in the YAAXAIUU (13) (IMAGE 1); its coagulation in some cases, and its subsequent return to the colloidal “SOL” state, are brought about thanks to the characteristics of the solvent used, since at a threshold temperature of 24,611º C (EARTH MEASURE) it becomes an electrolyte of high conductivity. Its thixotropic properties are nil, so that no dynamic effect within it (agitation) causes its transformation into “SOL”.

 

 

Beforehand, too, our travelling brothers have put on the EEWEANIXOO (HERMETIC PROTECTIVE SUIT) (SEE NOTE 6 of the APPENDIX), so that the OEMII (HUMAN BODIES) remain suspended within the Jelly (TAXEE) of high viscosity index, which among other functions acts as a protector or shock absorber against the high acceleration peaks experienced by the structure on certain occasions.

 

Simultaneously the AYIIYAA OYUU “Floats” inside the superstructure of the UEWA, within a very energetic Magnetic Field generated by the AAXOO XAIUU AYII (located in another toroid embedded in the DUUII -IMAGE 1 (14) ). This medium-frequency Field generates in the membrane of the AYIYAA OAYUU (a MEMBRANE whose coefficient of electrical resistivity is very low when kept at temperatures of the order of 0,000825º Kelvin) circular electric currents whose axial magnetic field, opposing the inducing one, keeps in suspension the toroidal cabin in which the crew travel, protected by the gelatinous mass.

 

This magnetic suspension has not been brought about precisely in order to compensate for gravitational actions, which of course are almost non-existent in intragalactic space; rather, by maintaining rigorous control at all points of the cavity as regards Field intensity, frequency and gradient, this YAAXAIUU behaves like a “perfectly elastic mattress” that cushions the abrupt dynamic effects suffered by the Ship.

 

In this way we enjoy during the journey the double protection represented on the one hand by the TAXEE (JELLY) and on the other by the magnetically controlled Elastic Medium. Of course, not even such protection would suffice against certain levels of acceleration, which are never exceeded, although certain effects that I explain at the end of this report appear to suggest the contrary.

 

AGIOA PHASE (IMAGE 3)

 

But within the long trajectory of our journey, and once a stable kinematic regime has been reached, all the safety measures described are unnecessary.

 

The stabilization process is as follows: by means of rigorous control of the magnetic Field, the AYIYAA OAYUU Cabin is placed exactly on the axis of the UEWA, its centre of gravity descending with respect to that of the Ship until it is assembled or fitted onto a protuberance situated at the base, called ENNOII AGIOAA (IMAGE 10 (22) )

 

 

 

This connection or assembly does not imply mechanical contact between surfaces; on the contrary, a gap of some 0,6 twelfths of an ENMOO remains (IMAGE 10 (58) ), which is filled, as we shall see later, with a colloidal suspension acting as a lubricant.

 

Indeed: simultaneously a second process has begun inside the Cabin. The gelled mass is brought by a double effect (thermal change and controlled ionization) to the state of HYDROSOL, as your brother scientists call it (in other words, the protective Jelly again takes on the initial Liquid structure of a colloidal suspension). The liquid mass is pumped outside, that is, into the YAAXAIUI (MAGNETIC CAVITY filled with ARGON-OXYGEN). In the absence of a Gravitational Field this liquefied mass can divide into a multitude of spheroidal corpuscles floating within the cavity.

 

We crew members can then move freely inside the long annular corridor, after shedding a part of our EEWEANIXOO. This phase is called, as I told you before, AGIIOA.

 

Notice how in IMAGES 1 (9) we have shown the crew walking with their bodies held parallel to the equatorial Plane of the toroidal AYIYAA.

 

This is because both in the AGIIOA phase and in the OOE Phase the annular cabin maintains a constant angular velocity in order to produce artificial gravity (centrifugal Force). The side effects caused in the vestibular system of the inner ear, and other small psychophysiological disorders, have been overcome.

 

In certain cases it is necessary for the relative velocity of the two structures (ENNAEOI and AYIIYAA OAYUU) to be zero; that is, for the inner annular cabin to form a single body with the outer enclosure. This is necessary when access is needed to the different zones of the superstructure (do not forget that many vital items of equipment, and even stores of products necessary for the long journey, are located there), and on other occasions in order to go outside through the IMMA (Hermetic Hatches).

 

In this case the Ship rotates on its central axis to adapt its angular momentum to that of the Cabin, so that the centrifugal acceleration (ARTIFICIAL GRAVITY) remains constant.

 

But in any case, the automatic control of the system is self-compensating. The Central XAANMOO (COMPUTER) is not only informed at every instant of the variations of the Centre of Gravity and of the Centre of Inertia of the UEWA, but also keeps a time record of all the deformations and microdeformations of the structural mass. So that if, for example, any element of the Spaceship begins a rotation, causing, by the principle already known to you of “Conservation of momentum”, an opposite rotation of the UEWA, the XAANMOO controls the Dynamics of other components, stimulating them to compensate for this effect.

 

===========================================

 

NOTE NUMBER SIX (6)

 

The EEWEANIXOO constitutes what you would call a “DIVING SUIT” or SUIT.

 

In reality this protector is successively replaced by others of different characteristics for various flight conditions.

 

The EEWEAANIXXOO OOE is used precisely in the phase in which the AYIYAA OAYU (IMAGE 1 (12) or TOROIDAL CABIN is filled with a JELLY which we call DAXEE. This Gelatinous mass, besides other functions, acts as a shock absorber in the accelerating or decelerating processes of the UEWA.

 

The travelling OEMII is thus embedded within that viscous mass, isolated from direct contact with his brothers and subjected to the dynamics of accelerations which have sometimes exceeded 245 metres / second² Although these peak gradients in the velocity function last a few fractions of a UIW.

 

The description both of these “SUITS” and of the BIEWIGUU AGOYEE system would require, at a popular level, as many pages again as this report.

 

In summary we will tell you that the EEWE (GARMENT) is a complex membrane that surrounds the body of the traveller peripherally, without its surface establishing any mechanical contact with the epidermis of the OEMII (HUMAN BODY).

 

The whole is placed in the gelatinous mass and controlled in such a way that, when an acceleration is about to occur in a given direction, the gelled substance liquefies around it and the traveller's body, with outside help, adopts a suitable posture so that the effects are minimal. The space between the inner surface of the EEWEEANIXOO OOE and the human skin is rigorously controlled according to the degree of capillary vasodilation of the epidermis and its perspiration. In this way the body's metabolic heat takes on the normal values for the traveller's usual conditions. Pressure, absorption of Carbon Dioxide, regulation of Nitrogen, Oxygen, water vapour and other components of the internal compound gas are self-regulated according to the information supplied by the detectors that monitor at every instant the metabolic and Physiological activities of the respiratory, circulatory and epidermal systems.

 

The Physiological control equipment has been provided with transducer probes that check almost all the organic functions without the need to introduce such ????? (Typist's note: it cannot be read well in the original; it seems to say UAXUOETY or OAXUOETT. this note is by the typist) into the organic tissues. From muscular activity and the evaluation of Glycogen and lactic acid levels to the complex monitoring of neurocortical activity, which supplies precise data on the psychic state of the subject, the whole range of biological dynamisms is recorded, and this stream of information is supplied through some 2,16 · 10⁶ information channels to a XANMOO which, after comparing it with standard patterns, “dictates” the effector or motor responses to the organs of the BIEWIGUU AGOYEE.

 

Feeding takes place by introducing paste through the mouth. Some foods and the water are introduced in capsules with a tasteless coating that dissolves instantly on contact with saliva. The thermal gradient varies in the different peripheral zones of the enclosure. The sensation we experience on the journey during the OOE phase, in the intervals when acceleration is zero or moderate, can be defined as a placid perception of floating on a cushion of warm air.

 

The vestibular effects caused by the rotation of the AYIYAA OAYUU to produce artificial gravity are barely noticed, owing to the introduction, by means of a simple surgical intervention, of two control devices in the vicinity of the membranous Labyrinth (both, needle-shaped, are inserted without damaging tissues or the arterial and neuronal network).

 

The space separating the epidermis from the EEWE undergoes a considerable enlargement at the face, in the shape of a truncated cone. The base of this truncated cone, which the eye can take in at an angle of 130 sexagesimal degrees at a distance of 23 centimetres, is a screen provided over its area with some 16 · 10⁷ excitable centres, each capable of radiating, at various levels of intensity, the whole magnetic spectrum between 3,9 · 10¹⁴ and 7,98 · 10¹⁴ cycles /second. The definition of the images obtained is high enough that the two eyes cannot discriminate between normal visual perceptions and that generated artificially in this organ.

 

Binocular vision is achieved thanks to the prismatic arrangement of each emitting nucleus. The excitation of opposite faces, in such a way that neither eye has access to the image or mosaic of the other, is achieved in a very complex way. IMAGE A. (U-C Note: IMAGE A of NOTE 6 is missing) A transducer records the electric fields generated by the ocular muscles of both eyes (true electromyograms). The XANMOO thus knows at every moment the orientation of the pupillary axis. On the other hand, the excitable prisms that make up the screen (these being of microscopic dimensions) are located on the surface of a layer of viscous emulsion that allows them to rotate freely. These prisms are controlled mechanically by means of a double magnetic field, so that half of them obey a horizontal component of the field and the rest the transverse one. In this way each group orients its faces independently, just as two Venetian blinds of the kind used by Earth people orient their slats independently when one pulls the cords that regulate the angle at which light enters (in this case the “cords” will be the two magnetic fields, and the driving factor the response of the XANMOO to the muscular micromovements of the eyeball.

 

Binocular perception offers images with normal relief, so that the subject believes he is living in a real world, far from the envelope and the gelatinous mass surrounding him. He may try to grasp objects that he “sees close to him”, and since the freedom of muscular movement is ample despite the resistance of the viscous medium, it is advisable that he should “try” to do so, in order to avoid muscular inactivity.

 

The acoustic stimuli are synchronized with the image. The traveller can see the faces of his brothers, talk with them, or immerse himself in the landscape full of ANAUGAA (a tree species) of our distant forests of UMMO. Two YOYGOAAXOO lodged in the nostrils supply, in sequences not as rich as in the natural environment but fast enough, programmes of IAIKEAI (OLFACTORY STIMULI), also synchronized with the image. This is one of the aspects of the Psychobiological control to which the travelling brother is subjected. We can at will display the control equipment of the UEWA, or read a study text. One of the most interesting means is DOOGOO. Thanks to this system, the muscular movements imitating the grip of a stylus -or, as you would call it, a pencil or brush- are injected, after being recorded, into the XANMOO. This orders the responses of the hand as if it had in fact traced a drawing, a graph or a text. The artificial image of this fictitious composition appears on the binocular screen, as if one had in fact drawn such graphic characters on a surface.

 

A device integrated in the rectum collects the traveller's faeces. These are first dehydrated; the residues are then, by rigorous chemical analysis, dissociated and transmuted into Oxygen or another gaseous chemical element. Something similar is done with the urine, so that the chemically pure water of both excretions, together with the surplus from the gaseous enclosure of the EEWEE (whose degree of humidity is a continuously regulated function), is sent to the central tanks in the form of vapour.

Back

 

NOTE NUMBER TEN (10)

 

The structural morphology of our OAWOOLEA UEWA OEMM has a peculiar profile that approximates fairly well to the ideal prototype we call YONNIANA /It is an untranslatable mathematical term/.

 

YONNIANA is a solid of revolution that we will describe to you below. Its configuration as a modelled volume is optimal for the construction of a Spaceship capable of inverting its IBOZOO YUU in order to travel in another three-dimensional framework.

 

I have already explained to you that, to achieve OAWOOLEAIDAA, any mass requires an energy input whose amount depends exclusively on the value of this inert mass. Of course, after this inversion, that energy is gradually restored in the form of mass, but that is another, marginal question.

 

However, the energy input does not take place in an instant. In a prior process, different levels of Power are supplied at each instant. As the instant t₀ of the OAWOOLEIDAA approaches, the Power needed keeps increasing until, in some structural models, it reaches extremely high levels.

 

The POWER Function (a function of Time) is different for each geometric type of structure (IMAGE A); that is, it varies with the profile or shape of the enclosure.

 

IMAGE A

 

In the images we have represented seven structures, on the assumption of identical mass in all of them (so that the energy for the inversion of the IBOZOO UU is equivalent).

 

IMAGE A

 

See, however, how the Power brought into play at each instant during the interval Δt preceding t₀ (INVERSION OF THE IBOZOO UU) varies in such a way that it comes to reach an inordinate value -compared with other models- in the case of the cylinder with DIAMETER = HEIGHT.

 

There is a singular case not reflected in the series: the REGULAR TETRAHEDRON. For a mass shaped according to that polyhedron, the Power needed at the instant /t₀/ becomes (tends to ) infinite, while Δt becomes practically zero. (Needless to say, a ship built with that peripheral structure is unfeasible).

 

The series of IMAGE A has been ordered according to the criterion of classifying the profiles by the “Maximum Power Needed” to achieve the OAWOOLEAIDAA.

 

The most suitable structural type, as I indicate above, is the YONNIANNAA.

 

Unfortunately, functional requirements that are mutually incompatible make it necessary to force the profile towards a shape that, while keeping some features of the former, can at the same time fulfil many other simultaneous conditions related to intragalactic Navigation and to the functionality of the on-board equipment.

 

YONNIANNA is the name we give to a solid of revolution whose half-profile is expressed analytically by a very elementary function that you surely know:

 

 

 

The YONNIANNAA would be expressed by a volume resulting from duplicating, about a plane of symmetry AB, the solid of revolution generated by rotating the dotted surface of IMAGE B about the axis of rotation (y, -y).

 

 

 

IMAGE B

 

The equatorial plane would be defined by the value y=1, and the resulting volume would theoretically extend to infinity.

 

On the other hand, this profile or any other is valid for navigating in Galactic space. When I speak of the OPTIMAL PROFILE I mean it in relation to the minimum “maximum Power” needed to invert its subparticles, but unfortunately it is not optimal when it comes to flight within a viscous fluid such as the air familiar to you. (Note that the second structure in the list is a cylinder capped by two ogives.) Of course, the profiles of IMAGE A have been selected as a random sample.

Back